Strong SRT 5001 ECO User Manual page 6

PART 1 • English
Protecting the Power Cord - The power supply cord should be placed so it will not
be walked on. Never put a heavy object on the power cord or wrap it around the
leg of a table or chair. Keep the area around the power cord connection points, at
the power outlet, and at the product connection, free of all AC adapter or accessory
power cords.
gEnERAl PRECAUTIOnS - SAfETY PRECAUTIOnS
lightning - If a lightning storm occurs while using a specified AC adapter, remove it
from the wall outlet immediately. To avoid damage from unexpected power surges,
always unplug the AC adapter from the power outlet and disconnect it from the
receiver when the receiver is not in use.
Overloading - Never overload wall outlets, extension cords, power strips, or other
power connection points with too many plugs.
Foreign Objects, Liquid Spillage-To avoid personal injury caused by fire or electrical
shock from contact with internal high voltage points, never insert a metal object
into the product. Avoid using the product where there is a danger of spillage.
heat - Never use or store this product near any heat source such as a radiator
heat register, stove, or any type of equipment or appliance that generates heat,
including stereo amplifiers.
Servicing - Refer all servicing to qualified personnel. Attempting to remove the covers
or disassemble the product, could expose you to dangerous high voltage points.
Damage Requiring Service - If you notice any of the conditions described below
while using a specified AC adapter. unplug it from the wall outlet and refer
servicing to qualified service personnel:
1. Liquid has been spilled onto the product or some other object has
fallen into the product.
2. The product has been exposed to water.
3. The product does not operate normally despite following operating
instructions. Adjust only the controls described in the operating
instructions ad improper adjustment of other controls could damage
the product and require extensive repair word by a qualified technician.
4. The product has been dropped or damaged in any way.
5. The product exhibits distinct change in performance.
Replacement Parts - When replacement parts are required, mare sure that the
authorized service centre uses only parts with the same characteristics as the
originals, as recommended by the manufacturer. Unauthorized substitution of
parts could result in fire, electrical shock, or create other hazards.
Safety Check - Upon completion of servicing or repairs, ask the service technician
to perform safety checks to determine that the product is in good working order.
3