Strong SRT 5001 ECO User Manual page 14

PART 1 • English
better overview if press OK first. Now you can select desired setting by
pq buttons and confirm it with OK.
2. Press EXIT button to exit.
5.3.1 OSD language
This menu allows you to set OSD Language.
5.3.2 Subtitles preference
This menu allows you to set preferred Subtitles Language and select Subtitles Type
between Normal and Hard of Hearing.
note: This option is only available if Denmark is selected in First Installation Mode.
5.3.3 Tv System
This menu allows to setup different settings concerning your TV set.
Display Mode:
Aspect Ratio:
Video Output:
5.3.4 Region and Time
Here you can set your region and time zone.
Region:
GMT Usage:
GMT Offset:
Date/Time:
Time Display:
5.3.5 Timer Setting
In this menu you can set a programme timer or sleep timer.
Programme timer
Timer Number:
Timer Mode:
Timer Service:
PAL/NTSC/AUTO
Use this menu to configure the screen aspect between: 4:3 PS
(Pan&Scan), 4:3 LB (Letter Box) and 16:9 (Wide Screen)
Use this menu to switch the video output mode either to RGB
or to CVBS
This menu is used for changing the region setting.
This menu is used for usage of GMT.
The options are: Off / User Define / By Region
This menu is valid only when selected "User Define" in GMT
Usage menu. The GMT offset range is "-11:30 ~ +12:00",
increasing by half hours progressively.
"Date" and "Time" menus are valid only when selected "Off" in
GMT Usage menu. Press OK then numeric button to change
the date and time.
This menu allow to control whether the time is displayed on
screen or not. The options are: Off/On.
You can set 8 timers
Off/Once/Daily/Weekly/Monthly
TV Service/Radio Service
11