Admiral AGD4675YQ0 Installation Instructions Manual page 15

29" and 27" wide models gas and electric
Table of Contents

Advertisement

Available languages

Available languages

29" Wide
Model
Large Side=Swing
Door
1, Place towel
on dryer
J
11
Place towel on top of dryer to avoid damaging the surface.
4,
emove
and transfer
hinge
hole plugs
Use a small, flat-blade screwdriver to gently remove 4 hinge
hole plugs on left side of dryer cabinet. Insert plugs into hinge
holes on opposite side of dryer cabinet.
dryer cabinet
Open dryer door. Remove bottom screws from dryer cabinet
side of hinges. Loosen (do not remove) top screws from dryer
cabinet side of hinges.
NOTE: Two people maybe needed to reinstall door.
Insert screws into bottom holes on left side of dryer cabinet.
Tighten screws halfway. Position door so large end of door
hinge slot is over screws. Slide door up so screws are in
bottom of slots. Tighten screws. Insert and tighten top
screws in hinges.
Lift door until top screws in cabinet are in large part of hinge
slot. Pull door forward off screws. Set door on top of dryer.
Remove top screws from dryer cabinet.
Close door and check that door strike aligns with door
catch. If needed, slide door catch left or right within slot
to adjust alignment.
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents