MK Diamond Products MK-370EXP Owner's Manual page 34

MK-370EXP SAW TROUBLESHOOTING
HORIZONTAL FINAL ALIGNMENT
Ruler/Stop
(A) (C)
(B)
Pull Movable Cutting Table Position Square flat on Movable Position front of Square
to front of Tile Saw Cutting Table against Ruler/Stop against Blade
(D) (F)
(E)
Move Guide Bar and table
Move Guide Bar and table
Position end of Square
until Square rests evenly
until Square rests evenly
against Blade
across Blade
across Blade
HORIZONTAL ALIGNMENT VERIFICATION
(A)
(B) (C)
Move the Cutting Table
Tighten Guide Bar Move the Cutting Table back
back and forth to verify Retaining Bolts
and forth to re-verify Blade
Blade is even is even across all points of
across all points of Square Square
34