MK Diamond Products MK-370EXP Owner's Manual page 15

MK-370EXP SAW ASSEMBLY
Motor Shaft
Inner blade
Turn Counter-Clockwise
Guard
Motor
Blade Wrench
Shaft Wrench
(D)
(E) (F)
Place the Shaft Wrench Install Diamond Blade
Using the Blade and Shaft
between the Inner Blade Wrenches, loosen and onto Blade Shaft
Guard and the Motor and remove the Retaining Nut
onto the Motor Shaft and Outer Flange
(G) (H) (I)
Install the Retaining Nut Close the Blade Guard Verify the Blade is seated
and Outer Flange and then on the Blade Shaft and
tighten using the Blade and direction of rotation is
Shaft Wrenches correct
(J) (K)
Tighten the Blade Guard Tighten the Blade Guard,
Retaining Wing nut Retaining Knob
15