Air Live POE-FSH2422G-250 User Manual page 30

4. Web Management
Auto-Negotiation: Enable and Disable. Being set as 'Enable', the Speed, Duplex mode,
Pause, Backpressure, TX Capability and Address Learning are negotiated automatically.
When you set it as 'Disable', you have to assign those items manually.
Speed: When the Auto-Negotiation column is set as Disable, users have to set the
connection speed to the ports ticked.
Duplex: When the Auto-Negotiation column is set as Disable, users have to set the
connection mode in Half/Full to the ports ticked.
Pause: Flow Control for connection at speed of 10/100Mbps in Full-duplex mode.
Backpressure: Flow Control for connection at speed of 10/100Mbps in H alf-duplex
mode.
TX/RX Capability: When the Auto-Neg otiation column is set as Disable, users have to
set this column as Enable or Disable.
Addr. Learning: When the Auto-Negotiation column is set as Disable, users have to set
this column as Enable or Disable.
Select Port No.: Tick the check boxes beside the port numbers being set.
Click Up date to have the configuration take effect.
Current Status: Displays current port status.
Setting Status: Displays current status.
Clic k Update to make the configuration effective
AirLive POE-FSH2422G-250 User's Manual
25