Download Print this page

Mobile Homes; Recreationalpark Trailers - Jenn-Air JGR8890 Series Installation Instructions Manual

Double oven range
Hide thumbs Also See for JGR8890 Series:

Advertisement

Available languages

Available languages

PLEASEKEEP THiS MANUAL FOR FUTUREREFEREmCE
This manual is intended to assist in the initial installation and adjustments of the range.
, Onlyqualified personne!should install or sep;ice this range,
Read "Safety instructions" in Use & Carebook before using range.
* improper instaliatioo, adjustment, alteration, service, maintenanceor use of range
can result in serious injury or property damage,
C A U T ! 0
N S
Donot lift or move range by grasping door handles,train top,
or backguard.
This range has been designed in accordancewith the
requirements of various safety agendes and complies with
All R ANGES
CAN T aP AND USE
i INJtIRtES TO PERSONS,
NSTALL
AN |-TIP
D OES
PACKED
WiTH RANGE.
. FOLLOW ALL iNSTALLATION
iNSTRUCTIONS.
A risk of range tip-over exists if the appliance is not installed in
accordance with the provided instailatien instructions. The proper use
of the ANTFTIP device minimizes the risk of TIP-OVER, In using this
the maximum allowable wood cabinet temperatures of Ig4T.
if this range is installed with cabinets that have a {ower
working temperature than 194_F, d isco!oration,detaminatioo
or melting may occur.
Place range in a well tit area. Donot set rangeover holes in
the floor or other locations where it may be subied to strong
drafts.Any opening in the wall behind the range and in the
floor under the range should be sealed. Make sure the flow
of cooling/ventilation air is not obstructed below the range.
Note:A range should NOTbe installed ever kitchen carpeting.
NighNtitude Notice: Thespecified gas burner ratings
_picalty apply to elevations up to 2000 feet. For higher
altitudes, the rates may need to be reduced to achieve
satisfactory operation. A local certified gas servicer wiii be
able to adviee if a reduction is necessary.
Electrical Grounding I_tructions - This appliance isequipped
with a fthree-prong) grounding plug for your protection against
shook hazardand shouid be plugged directly into a properly
grounded receptacle. De not cut or removethe groundingprong
from this plug.
device the consumer must still observethe safety precautionsas
stated in the USEand CAREMANUAL and avoid using the oven doers as
a step stool, Installation instructions are provided for wood and cement
in either fleer or walt. Any other type of construction may require
speciaBinstallation techniquesas deemed n_e_Sary to provide
adequatefastening of the ANTFTIPbracket to the flooror wail The
bracket must be installedto engage the RIGHT rear leveling foot. Install
the bracket as shown in steps 8a or 8b through 12.
MOBILE HOMES
The instaiiatioo of a range designed for mobile home instagation must
conform with the Manufactured Home Constructionand Safety
Standard,Title 24 CFR, P art 3280 (formerly the Federal Standardfor
Mobite HomeConstructionand Safety,Title 24 HUD> P art 280) or,when
such standard is not applicable,the Standardfor ManufacturedHome
InstallationsANSIA225.1iNFPA501A,or with local codes, in Canada
the range must be installed in accordance with the current &SA
Standard C22.1- CanadianElectrical Code Part t and SectionZ240,4 1
- installation Requirementsfor GasBurning Appliances in Mobil Homes
(CSAStandard CAN/CSA - Z240MH)_
RECREATIONALPARK TRAILERS
The instaiiatioo of a range designedfor recreational park traitors must
conform with state or other codesor, in the absenceof such codes,
with the Standardfor RecreationalPark Trailers,ANSiA! !g.5-tatest
edition, in Canadathe range must be installed in accordancewith
CAN/r_A - Z240,&2 - Electrical Requirementsfor R.Ws(CSAStandard
CAN/CSA- Z240 RVSeries)and Section Z240>4,2- Installation
Requirements for PropaneAppliances and Equipmentin R.V.'s(CSA
Standard CAN!CSA - Z240 RVSeries).
Electric Supply
The appliance,when installed, must be electricelty grounded in
accordancewith local codes o17 in the absence of local codes, with the
NationalEtectdcel Code,ANSI/NFPA 70. In Canadathe range must be
installed in accordancewith tlie current CSAStandardC22,1-
CanedianElectrical Code Part 1.
Electrical Supply Connection
The rangerequires 120 volts,60 cycle alternating current from a
dedicated groundedoutlet with a 15 amp circuit breaker.Seeserial
plate for rating, located on flip-up plate at the rear of upper left-hand
corner of backguard. User may experience occasionalcircuit tripping if
Ground Fault Circuit Interrupter (GFC!)outlet or breaker is in use,

Advertisement

loading