AUSTRALIAN MONITOR Innovation IN400 Installation And Operation Manual
AUSTRALIAN MONITOR Innovation IN400 Installation And Operation Manual

AUSTRALIAN MONITOR Innovation IN400 Installation And Operation Manual

Av switching amplifier innovation series

Advertisement

Quick Links

IN400
AV SWITCHING AMPLIFIER
INSTALLATION AND OPERATION MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Innovation IN400 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for AUSTRALIAN MONITOR Innovation IN400

  • Page 1 IN400 AV SWITCHING AMPLIFIER INSTALLATION AND OPERATION MANUAL...
  • Page 2: Important Safety Information

    Do not parallel- or series-connect an amplifi er output with any other amplifi er output. Australian Monitor Inc is not 7. Always operate the unit with the AC ground wire connected to the responsible for damage to loudspeakers for any reason.
  • Page 3: Table Of Contents

    REAR PANEL The IN400 is a compact AV switching amplifi er with a host of extra features SETUP available to the AV integrator. With 8 AV inputs as well as mix in, stereo line...
  • Page 4: Front Panel

    IR SENSOR This is the sensor used for IR control. A hand held remote control is supplied with the IN400. Line of sight is required for the remote control to work. COMMS LED This LED indicates when data is sent or revceived via IR or RS485.
  • Page 5: Rear Panel

    AMP OUT 115V model 12.5A The IN400 has a built in audio stereo power amplifi er. The input signal is parallelled from the AUDIO OUTPUT. The power amp is rated at 2 x 80W into Always replace the fuse with one of the same value and type.
  • Page 6: Setup

    ‘daisy chain’ confi guration with a maximum of 32 devices in the chain. The IN400 is not terminated Stop Bit: - delimiter so may be inserted anywhere in the data network. If the IN400 is being used at the end of a chain, Parity Bit: None...
  • Page 7: Installation

    AWG10 AWG13 AWG14 AWG16 AWG17 AWG18 AWG20 AWG22 AWG24 AWG26 or CAT6 UTP cabling. RS485 data networks should be wired in a ‘daisy chain’ confi guration with a maximum of 32 devices in the chain. The IN400 is not Speaker terminated so may be inserted anywhere in the data network.
  • Page 8: Block Diagram

    BLOCK DIAGRAM PAGE 8 IN400 INSTALLATION AND OPERATION MANUAL...
  • Page 9: Dimensions

    DIMENSIONS IN400 INSTALLATION AND OPERATION MANUAL PAGE 9...
  • Page 10: Specifications

    482 x 44 x 325mm 19 ” x 1.75” x 12.8” NET WEIGHT 7.0kg 15.4lb SHIPPING WEIGHT 9.0kg 19.8lb SHIPPING DIMENSIONS (WXHXD) 520 x 90 x 420 mm 19.0” x 3.5” x 16.5” PAGE 10 IN400 INSTALLATION AND OPERATION MANUAL...
  • Page 11 NOTES IN400 INSTALLATION AND OPERATION MANUAL PAGE 11...
  • Page 12 AUSTRALIA AND NEW ZEALAND www.australianmonitor.com.au SYDNEY MELBOURNE BRISBANE ADELAIDE PERTH AUCKLAND (SA & NT SALES) (NSW & ACT SALES) (VIC & TAS SALES) (QLD SALES) (WA SALES) (NZ SALES) 1 Clyde Street 22/277 42 Commercial Road 31 Walsh Street 3/11 Howe Street 9C Piermark Drive Silverwater Middleborough Road...

Table of Contents