Note:
❏ Do not turn off the power or press another mode's button while
faxing, as the fax process may be performed incorrectly.
❏ If no button is pressed for more than 3 minutes, any changes
made are canceled and the mode returns to the Print mode.
3. Place your original either on the document table or in the Auto
Document Feeder. For details, see "Setting Your Originals"
on page 154.
4. Enter the recipient's fax number directly from the numeric
keypad on the control panel.
Note:
❏ A maximum of 50 characters can be entered for a recipient.
❏ If an incorrect number is entered, press the
delete a character left to the cursor. Pressing the l Left or
r Right button moves the cursor left or right.
❏ When entering the recipient number, numerics (0 to 9), #, and
✽
can be inserted using the numeric keypad.
❏ When you press the Redial button instead of entering the
recipient's fax number, the fax number you previously
transmitted is automatically entered.
❏ When pressing the Pause button while entering the recipient
number, a "-" is displayed for the pause.
❏ You can also send a fax using the One Touch Dial button or
the Speed Dial button. For details, see "Sending faxes using
the one-touch function" on page 250 or "Sending faxes using
the speed-dial function" on page 248.
5. Make the appropriate settings for your scanning purpose if
necessary.
Faxing (Fax Model Only)
Reset button to
247
8
8
8
8
8
8
8
8
8
8
8
8