Table of Contents
Advertisement
❏ When removing the photoconductor unit, avoid exposing it
to room light for more than five minutes. The unit contains a
blue-colored light-sensitive drum. Exposure to light can
damage the drum, causing dark or light areas to appear on
the printed page and reducing the service life of the drum. If
you need to keep the unit out of the product for long periods,
cover it with an opaque cloth.
❏ Be careful not to scratch the surface of the drum and belt.
When you remove the photoconductor unit from the product,
always place the unit on a clean, smooth surface. Avoid
touching the drum, since oil from your skin can permanently
damage its surface and affect print quality.
❏ To get the best print quality, do not store the photoconductor
unit in an area subject to direct sunlight, dust, salty air, or
corrosive gases (such as ammonia). Avoid locations subject to
extreme or rapid changes in temperature or humidity.
❏ Be sure to keep consumable components out of the reach of
children.
❏ Do not leave jammed paper inside the product. This can cause
the product to overheat.
❏ Avoid sharing outlets with other appliances.
❏ Use only an outlet that meets the power requirements of this
product.
Important safety instructions
❏ Connect your product to an electrical outlet that meets the
power requirements of this product. Your product's power
requirements are indicated on a label attached to the product.
If you are not sure of the power supply specifications in your
area, contact your local power company or consult your
dealer.
21
Advertisement
Table of Contents
