Configure The Network - Harris CM-30 Installation & Operation Manual

4 – Configuration & Operation
Backup: Click to back up the configuration file for the row selected. Click
back up all the configuration files. The backup procedure copies the CM-30 files to the FTP server.
Restore: Click to restore the configuration file for the row selected. Click
restore all configuration files. The restore procedure copies files from the FTP server to the CM-30
module.
Delete: Click to delete the configuration file for the row selected. Click
delete all the configuration files.
4.3.4

Configure the Network

4.3.4.1 Ethernet Interfaces
To access the Ethernet Interfaces page, point to Networking and click Ethernet Interfaces. Once
the Ethernet Interfaces page appears, click
parameters for that interface. Figure 4-35 shows parameters on both the WAN and LAN interfaces.
Harris Corporation
Intraplex Products
NetXpress LX & CM-30 Installation & Operation Manual
Network configuration (Networking) in the CM-30 system
includes these pages:
Ethernet Interfaces: View and set network addressing
configurations.
Forwarding: View and add routes to the IP address forwarding
table.
Class of Service: View and edit DiffServ markings for forwarded
packets, type of service (TOS) to priority mapping, and TOS byte
configurations.
DiffServ Marking: View and add an address to the DiffServ
markings for forwarded packets table, which includes source and
destination IP addresses and subnet masks and Type of Service
information.
SNMP: View and configure the SNMP (Simple Network
Management Protocol) community and event hosts.
UDP: View the UDP (User Datagram Protocol) Listener table and
set the UDP port number for signaling.
TCP: View the TCP (Transmission Control Protocol) connections
table of local and remote IP addresses and port numbers and
connection states.
ARP: View the ARP (Address Resolution Protocol) table of Media
Access Control and IP addresses for the system and other
devices it communications with.
on an interface row to view and modify address
Version 1, September 2010
in the table header to
in the table header to
in the table header to
4-35