Configure Individual Modules (Tdm Modules And Cams) - Harris CM-30 Installation & Operation Manual

4 – Configuration & Operation NetXpress LX & CM-30 Installation & Operation Manual
Version 1, September 2010
4.3.10 Configure Individual Modules (TDM Channel Modules)
From the NetXpress LX home page, you can access configuration and status pages for individual TDM
modules and channel access modules. Click the Open button for the desired module displayed on the
Home page.
Figures 4-73 and 4-74 show the configuration and status pages for a DA-91A Data Polling Module.
Once you access the configuration page, click the Status tab to access the module's status page.
Figure 4-73. DS-64NC Configuration
Figure 4-74. DS-64NC Status
The P Codes section of each module's operation manual gives additional details on configuration
parameters for specific audio, voice, and data modules. This section contains configuration and status
sample pages for Intraplex program audio (PT-353 – Figures 4-75 and 4-76), voice (VF-25E – Figures
4-77 and 4-78), and data (DS-64NC – Figures 4-79 and 4-80) modules.
Harris Corporation 4-77
Intraplex Products