Check Multiplexer Performance - Harris CM-30 Installation & Operation Manual

4 – Configuration & Operation
Notes: You cannot edit a stream when it is in service. If the stream is in service when you access the
Stream Configuration page, the Put Out of Service button appears. Click this button to
enable changes to stream information on the page.
When you first access a Stream Configuration page, the Reset and Submit buttons are
unavailable. If you change any data on the page, these buttons become available.
When the Enable Voice Signaling check box is selected, the Voice Card Used and
Signaling Insertion Byte fields appear.
4.3.5.3 Stream Group
Click the ID cell on the stream row to add that stream to the stream group. The selected ID cell
appears blue. Once a stream is added to the group, the
table operate on all streams in the group instead of all streams in the table. Any stream in the stream
group has an ID in blue. You can remove a stream from the group by clicking its stream ID cell again;
the selection highlight color on the stream disappears. To add or remove all streams from the stream
group, hold down the SHIFT key and click the stream ID header.
4.3.6

Check Multiplexer Performance

Use the Performance menu in the CM-30 system to monitor IP multiplexer performance. Review this
performance information:
4.3.6.1 Stream Statistics
The Streams Statistics table (Figure 4-55) shows statistics from the current interval for each stream
in the table. To access the table, point to Performance and click Streams. Click the ID number of a
stream to access performance history. (Figure 4-56 shows Stream 1 history.) Point to a table header,
and a tooltip appears that gives a definition of the statistic.
Harris Corporation
Intraplex Products
NetXpress LX & CM-30 Installation & Operation Manual
,
Streams: View stream statistics, including the number of
received and transmitted packets; packets lost, early, or late;
and the number of packets in the receive queue.
Voice Signaling: View the Voice Signaling Statistics table.
Ethernet Interfaces: The WAN and LAN Ethernet Interface
Statistics pages.
SNMP: The SNMP Statistics table.
UDP: The UDP Statistics table.
TCP: The TCP Statistics table.
ICMP: The ICMP Statistics table.
IGMP: The IGMP Statistics table.
IP: The IP Statistics table.
Version 1, September 2010
, and in the header of the stream
4-57