No header here
This manual covers both the NetXpress LX IP multiplexer and the CM-30 IP interface module. The
NetXpress LX multiplexer provides convenient provisioning and management tools to enhance
operational efficiency. This IP platform supports both unicast and multicast and is compatible with the
Intraplex NetXpress multiplexer.
The NetXpress LX multiplexer combines the technology of the original NetXpress multiplexer in a
module configuration compatible with Intraplex T1 or E1 systems. The NetXpress LX multiplexer is
available in either a 3RU frame with capacity for up to 17 application modules or a 1RU frame that can
hold five application modules. This multiplexer can work in a simple point-to-point and point-to-
multipoint designs and also as an "edge" device with the NetXpress multiplexer in large, multisite
networks.
While the CM-30 IP interface module operates as the command module in a NetXpress LX multiplexer,
this module can also replace the network interface module in an existing T1 or E1 system, converting
it to IP while utilizing the existing chassis with all its audio, voice, and data modules. With the CM-30
module, you can easily transition an existing Intraplex T1 or E1 system to cost-effective IP
transmission.
1.1 Key Features
The NetXpress LX system's features include
●
CM-30 IP interface module, which can convert existing T1 or E1 systems to IP
●
Compatibility with Intraplex NetXpress systems
●
Wide variety of audio, voice, and data interface modules
●
Optional echo cancellation for 2-wire voice circuits
●
Transport of two contact closures in each direction
●
Adjustable packet size
●
Programmable jitter buffer depth
●
Advanced Intraplex forward error correction
●
Quality of Service (QoS) priority tagging
●
Unidirectional or bidirectional unicast streaming
●
Unidirectional multicast streaming
●
Web browser user interface
●
SNMP control
●
Current and previous software revision storage
●
Network statistics monitoring
●
Event logging
1.2 Manual Use
This manual is the primary reference document for installing, configuring, operating, and
troubleshooting the NetXpress LX multiplexer and the CM-30 IP interface module. If you have
additional questions pertaining to the operation of your Intraplex system, you can contact Harris
Customer Service:
●
U.S., Canada, and Latin America:
●
Europe, Middle East, and Africa:
●
Asia and Pacific Rim:
Harris Corporation
Intraplex Products
Section 1 – Introduction
+1-217-222-8200 or
+44-118-964-8100 or
+852-2776-0628 or
tsupport@harris.com
Service.europe@harris.com
BCDService@harris.com
1-1