Harris HMX6803+ Installation And Operation Manual

8-aes audio multiplexer and 8-aes audio multiplexer with fiber output

Table of Contents

Quick Links

HMX6803+

8-AES Audio Multiplexer

OP+HMX+

8-AES Audio Multiplexer with Fiber Output

Installation and Operation Manual

Edition B

175-100062-00

Table of Contents

Need help?

Do you have a question about the HMX6803+ and is the answer not in the manual?

Questions and answers

Summary of Contents for Harris HMX6803+

Page 1 HMX6803+ 8-AES Audio Multiplexer OP+HMX+ 8-AES Audio Multiplexer with Fiber Output Installation and Operation Manual Edition B 175-100062-00...
Page 3 HMX6803+ 8-AES Audio Multiplexer OP+HMX+ 8-AES Audio Multiplexer With Fiber Output Installation and Operation Manual Edition B June 2009...
Page 4: Warranty Information
This publication could include technical inaccuracies or typographical errors. Changes are periodically added to the information herein; these changes will be incorporated into new editions of the publication. Harris Corporation may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time.
Page 5: Table Of Contents
Selecting an External Balun ................15 Setting Jumper CJ1 for Local or Remote Control ..........16 Maximum 6800+ Frame Power Ratings ............... 17 Installing 6800+ Modules ..................18 HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 6 SDI Video Inputs .................... 66 AES/DARS Inputs ..................67 Outputs ........................68 SDI Video Outputs ..................68 Laser Output (OP+HMX+ Only) ................69 Optical Port (OP+HMX+ Only) ................70 RS-232/RS-422 ..................... 71 HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 7 Precautions for Unenclosed Systems ............. 81 Labels ........................82 Appendix C: Communication and Control Troubleshooting Tips Overview ....................... 83 Software Communication Problems ..............84 Hardware Communication Problems ..............87 Index Keywords ....................... 89 HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 9: Preface
HMX6803+ and OP+HMX+ auto-sensing SD/HD-SDI 8-AES audio demultiplexers. Revision History Table P-1. Revision History of Manual Edition Date Comments April 2009 Initial release June 2009 Additional AFD feature set HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 10: Writing Conventions
Indicates important information that helps to avoid and Note troubleshoot problems Obtaining Documents Product support documents can be viewed or downloaded from our website. Alternatively, contact your Customer Service representative to request a document. viii HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 11: Unpacking/Shipping Information
Ship products back to us for servicing prepaid and, if possible, in the original packaging material. If the product is still within the warranty period, we will return the product prepaid after servicing. HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 12: References
3Gb/s Signal/Data Serial Interface SMPTE 425-M 2005 (Proposed) 3Gb/s Signal/Data Serial Interface - Source Image Format Mapping 47 Code of Federal Regulations Part 15 FCC rules—Radio Frequency Devices EN55103-1 HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 13: Safety Standards And Compliances
The Directive, which took effect on July 1, 2006, refers to the following hazardous substances: HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 14: Waste From Electrical And Electronic Equipment (Weee) Compliance
(Some EU member states may have different deadlines.) HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 15: Safety Terms And Symbols In This Manual
High voltage is present. CAUTION Statements identifying conditions or practices that can result in damage to the equipment or other property. HMX6803+ and OP+HMX+ Installation and Operation Manual xiii Copyright © 2009, Harris Corporation...
Page 17: Chapter 1: Introduction
FR6802+DM frames. HMX6803+ and OP+HMX+ must be installed in a frame with fans. Main Features All versions of HMX6803+ and OP+HMX+ include the following features: • Inputs • One serial digital SMPTE 292M/SMPTE 259M SDI input • Metadata HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 18: Optional Features
HMX68OPT+AES8 adds four balanced or unbalanced AES inputs, for a total of eight. The HMX68OPT+3G upgrade option adds 10-bit video processing with 1080p (progressive) video standard at 50/59.94/60 Hz frame rates as per SMPTE 424M. HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 19: Op+Hmx+ Module Types
Other connectors are available (see Table 1-2). Table 1-2. Available Connectors Item Description SC/PC fiber optic connectors (standard) OP+OPT+ST ST/PC fiber optic connectors (optional) OP+OPT+FC FC/PC fiber optic connectors (optional) HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 20: Module Descriptions
Navigation This switch navigates up and down through the available toggle switch control parameters: • Down: Moves down through the parameters • Up: Moves up through the parameters HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 21 • Remote: This jumper setting allows remote or local (card-edge) configuration, operation, and monitoring of the HMX6803+ and OP+HMX+ (this is the default setting) HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 22: Back Connectors
If you need to make your own breakout cable, pinouts are listed in Table 1-4, and pin numbers for the 44-pin connector are listed in Figure 1-4 on page HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 23 AES 7 Out AES7 OUT AES 8 Out AES8 OUT DARS IN DARS In DATA I/O Data I/O Genlock GENLOCK Serial SERIAL Figure 1-3. HMX6803+ and OP+HMX+ Breakout Cable HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 24 BNC GND AES OUT 3 AES OUT 3 Blue Blue AES OUT 3 AES OUT 3 Blue Blue BNC GND AES OUT 6 AES OUT 6 Blue Blue HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 25 Blue BNC GND AES IN 6 GND AES IN 6 White White AES IN 6 AES IN 6 White White AES IN 5 AES IN 5 White White HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 26: Rs-422/232 Cable
Table 1-6. Pin Assignment of DB-9 Connector (Female) in RS-232 Format Pin No. Signal Comments Frame Ground Frame Ground Frame Ground Transmitted Data Not connected Received Data Not connected HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 27: Signal Flow
DARS DARS Metadata Metadata router CCS & QSEE CCS & SNMP monitoring & control control Available via breakout cable (included). Figure 1-6. HMX6803+ and OP+HMX+ Signal Flow Diagram HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 29: Chapter 2: Installation
Remove the anti-static shipping pouch, if present, and all other packaging material. • Retain the original packaging materials for possible re-use. “Unpacking/Shipping Information” on page ix for information about returning a product for servicing. HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 30: Checking The Packing List
Adds 3G HD-SDI functionality to an 1.5G HD-SDI and SD-SDI module To purchase additional license keys, contact your Sales representative. To activate a license key, see “Adding a License Key” on page HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 31: Selecting An External Balun
NADITBNC-FX: Female cable end XLR 110Ω input - female BNC 75Ω output. http://www.neutrik.com/fl/en/audio/210_1576769505/NADITBNC-FX_det ail.aspx • NADITBNC-MX: Female BNC 75Ω input - male cable end XLR 110Ω output. http://www.neutrik.com/fl/en/audio/210_1923043515/NADITBNC-MX_d etail.aspx HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 32: Setting Jumper Cj1 For Local Or Remote Control
Remote control Local control setting setting Figure 2-2. CJ1 Settings for Local and Remote Control Note The white triangle near the jumper pins on the module indicates pin 1. HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 33: Maximum 6800+ Frame Power Ratings
FR6802+XF48 105 W 5.25 W (frame with DC power supply) FR6802+QXF frame 120W (with AC or DC power supply) FR6822+ frame (with AC or DC power supply) 120W HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 34: Installing 6800+ Modules
Front and back modules in the OPTO+ series have plastic caps that protect the fragile laser connections from damage. You must remove these protective covers before you install the back and front modules (see Figure 2-3). HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 35 Microscopic dust or other contaminants can seriously impair or disable a fiber optic network. Observe strict cleaning procedures. Do not touch the end of the fiber. 3. Follow the inspection and cleaning procedure that begins on page HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 36 Follow these steps to remove a front module from a frame: 1. Pull out the finger-release screws on the right and left side of the front panel of the frame, and then open the front panel. HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 37: Inspecting And Cleaning Fiber Optic Connections
Keep a protective cap on unplugged fiber connectors. • Do not touch the end of a fiber. • Store unused protective caps in a clean resealable container, located nearby for easy access. HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 38 3. If the fiber endface is clean, return to the installation instructions on page 19 for back modules or page 20 for front modules. If the connector is dirty, proceed to the dry cleaning instructions below. HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 39 If the fiber end still remains dirty after repeated cleaning attempts, call Customer Service for further instructions. If the fiber end is clean, return to the installation instructions on page 19 back modules, or page 20 for front modules. HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 40: Upgrading Module Firmware
3.1.1 or higher, or the HTTP software upgrade tool. In order to perform these upgrades, your frame must be equipped with a 6800+ETH module. See your frame manual for more information. HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 41: Operating Notes
HMX6803+ and OP+HMX+ modules all show a HMX6803+ label in Navigator. Thumbnail streaming is not supported for the following video standards: • 1080i 60 • 720p 60 • 1080p 24/25/29.97/30 • 1080psF 23.98/24 • 1080p 50/59.94/60 HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 42: Activating Hmx6803+ And Op+Hmx+ Functions
Navigator. If your license key is valid, the Installed Options field displays the features that are activated on the module, which in this case is 3G and/or AES. HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 43: Audio Test Tones
Embedding” on page OverWrt Attempts to overwrite existing audio data and control packets of the same group number with the new audio data (see “Overwrite Embedding” on page HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 44 ADS after embedding group 1 Other Other auxilliary data Group 1 auxilliary data Figure 3-2. In Append Embedding Mode, Adding Group 1 When Auxiliary Data is Present HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 45 Group 2 audio, as shown in Figure 3-5. ADS before embedding Group 2 ADS after embedding group 1 Group 2 Group 1 Figure 3-5. Append Embedding Mode, Adding Group 2 Following Group 1 HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 46 3-7), it will return an error because there is nothing to overwrite. ADS before embedding ADS after attempting to embed group 1 Result: Error is returned Figure 3-7. Overwrite Embedding Mode When There is No Pre-Existing Audio HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 47: Audio Embedding Errors
Overwrite mode for a particular audio group, but that audio group Embed Error does not exist in the incoming SDI signal To avoid embedding errors, follow these guidelines: HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 48: Mono Channel Audio Embedding
AES 1A source, follow these steps: 1. Leave the input audio routing path at the default configuration (SRCs 1-8 from deembedded audio, SRCs 9-16 from external AES audio). HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 49: Audio V-Fade
48 kHz in the “Rate” word of the audio control packet for each embedded audio group. (The parameters are listed on page 45.) HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 50: Audio Path
If an audio group already exists and you want to replace it, set the ADS Clean parameter to Yes (Processing > Audio > Embedding). Note The ADS Clean parameter removes all audio groups from the video stream. HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 51 Demux Ch source, set the Output AES 1-8 Source Select parameter(s) to Demux Ch 1/2, Demux Ch 3/4, etc. (Output > Audio Source Select > AES Audio). HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 52: Test Pattern Generator
When you use Sample Rate Conversion with PCM Audio to change audio rates and provide audio synchronization with output video, this introduces a delay in the audio signal path. HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 53: Afd/Wss/Vi Detection And Insertion
Twelve output parameters (Output > AFD/VI/WSS Embedder) determine the line to embed AFD, WWS, and/or VI codes on, the code(s) to be embedded, and what happens when a code disappears from the input. HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 54: Cross-Functional Parameter Changes
16:9 full • 14:9 p • >16:9 in 16:9 • 4:3 p • 16:9 prtctd • 4:3 p a 14:9 • 16:9 a 14:9 • 16:9 a 4:3 HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 55: Ads Clean Parameter
• Audio Ch 1 Gain = Enabled Audio Ch 1 Format = PCM • Audio Ch 1 Invert = Enabled Audio Ch 1 Format = Auto Audio Ch 1 Format Feedback= PCM HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 56: Channel Word Length
The SD parameters apply when SDI Video Standard Set is set to either 525i 59.94 or 625i 50, or when it set to Auto and SDI IP Video Standard Feedback is 525i 59.94 or 625i 50. HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 57 • WSS Embed Line Fld2 • WSS Select • VI AFD Present • WSS Output • VI Scan Present • Out Aspect Ratio • VI Control • VI Embed Line HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 58: Changing Parameter Settings
3. Rotate the hex switch to the parameter number (1 to 9) or letter (A to F) of the option you want to set. 4. Toggle the navigation switch to select and set the value of the chosen parameter. 5. Do either of the following: HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 59: Changing Parameter Settings Using Ccs Software
Laser Wavelength parameter displays Not Installed. In addition, if the module is an OP+HMX+, it will have one additional alarm that standard HMX6803+ modules do not. This alarm is Laser Failed. HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 60: Setting Hmx6803+ Remote Control Parameters
Legend Bold option=Indicates that this is the default setting for the parameter. Rows of the table that are in grey are read-only parameters. HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 61 • 1080p 29.97 • 1080p 59.94** • 1080p 25 • 1080p 50** • No SDI Electrical IP Reports the presence of the Present SDI input video signal • Yes HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 62 DARS Present Reports the presence of the DARS reference signal • Yes • No DARS Locked to Reports the locked status of Video the DARS input signal • Yes HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 63 Input > Audio > Format • Auto Aud Ch(1-32) 1, 9 Selects the AES format (SRC1a-16b) Format (Auto/PCM/Non-PCM) of • PCM • the selected input audio • Non-PCM • channel 3, A HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 65 Processing > Audio > Sample Rate Conversion • Auto SRC (1–16) Control 3, B Controls insertion of the audio sample rate converter • Enable • in the processing path • Bypass • 4, B HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 66 • On Processing > Audio > Mute > Embedded Audio • Off Output Emb Ch (1 - Enables muting for 16) Mute specified output embedded • On audio channel HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 67 3 embedder • No Group 4 Append Reports if an append Embedding Error embedding error has • Yes occurred in the group 4 embedder HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 68 Processing > Video > Delay • No Video Delay Bypass 13, C Controls insertion of the video delay circuit into the • Yes signal processing path HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 69 Adjusts gain for the Y -3.0 to +3.0 dB (0 dB) channel Cb Gain 13, 2 Adjusts gain to the Cb -3.0 to +3.0 dB (0 dB) color difference component HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 70 VBI line (720p output only) • Off VBI Line (1122–1123) Deletes to black the active Delete video portion of the • On selected VBI line (1080p output only) HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 71 VBI line (625 output only) • Off VBI Line (561–562) Deletes to black the active Delete video portion of the • On selected VBI line (1080i output only) HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 72 Audio Ch 9/10 Word 8, 2 Length Audio Ch 11/12 Word 8, 3 Length Audio Ch 13/14 Word 8, 4 Length Audio Ch 15/16 Word 8, 5 Length HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 73 Output > Audio Format > Embedded audio • PCM Output Emb Ch (1–16) Reports the AES format • Non-PCM Format Feedback (PCM/non-PCM) of • Unknown specified output embedded audio channel HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 75 • 16:9 a 4:3 • None VI Output (Scan) Indicates current VI output code Scan part (526/625 • 525 4:3 only) • 625 4:3 • 525 16:9 • 625 16:9 HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 76 • 14:9 top • 16:9 Anamorphic • 16:9 center • No Custom On Loss Controls whether to insert custom code when • Yes upstream code disappears in code bypass mode HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 77: Leds And Alarms
Selected video standard is 1080i Green Selected video standard is 525 Green Selected video standard is 625i 50 VID PRES ELECT Green Electrical input video is present VID PRES FIBER Green Unused HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 78: Module Status Leds
There is power to the module; the module is operating properly. There is an alarm condition. Flashing red The module has detected a hardware/firmware fault. Amber The module is undergoing configuration. HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 79: Alarms
When an alarm is active, click this option to allow other users on the network to see that you have acknowledged the alarm. HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 80 0.0 s 2.0 s Master Mute On 0.0 s 2.0 s Laser Failed 6 (Major) 1 sec 2 sec (OP+HMX+ modules only) Loss of AFD 0 sec 0 sec HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 81: Overview
“Outputs” on page 68 • “Propagation Delay” on page 71 • “Power Consumption” on page 72 • “Start-Up Time” on page 72 Specifications and designs are subject to change without notice. HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 82: Inputs
492 ft (150 m) (typical) of for up to 984 ft (300 m) (typical) of Belden 1694A Belden 1694A coaxial cable (typical) of Belden 8281 coaxial cable coaxial cable HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 83: Aes/Dars Inputs
10 V pk-to-pk Bits 16, 20, or 24 16, 20, or 24 Channel status and user Maintained, but professional mode, 48 kHz (see Appendix A for full details) HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 84: Outputs
• >10 Hz: < 2.0 UI (675 • >10 Hz: < 1 UI ps) pk-to-pk (675 ps) pk-to-pk Delay Up to 11 frames Up to 11 frames Up to 50 frames HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 85: Laser Output (Op+Hmx+ Only)
Radiation Class OP+HMX+13D 1310 -7 dBm typical Continuous OP+HMX+CxxD 1270 1470 0 dBm typical 1290 1490 1310 1510 1330 1530 1350 1550 1370 1570 1430 1590 1450 1610 HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 86: Optical Port (Op+Hmx+ Only)
Failure to verify optical power before connection will void the warranty. To ensure error-free operation, the input power must be less than -7 Bm. HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 87: Propagation Delay
When HDX6803+ AES Output Source Selection is set to Demux Ch (Direct, SRC bypassed) SD / HD / 3G AES IN to AES OUT; SRCs ON 4.7 ms AES IN to AES OUT; SRCs OFF 1.8 ms HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 88: Power Consumption
The start-up time for HMX6803+ and OP+HMX+ modules is <10 seconds. Operating Temperature The operating temperature for HMX6803+ and OP+HMX+ modules is 41° to 113°F (5° to 45°C). HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 89: Appendix A: Audio Bit Manipulation
• [100] = Encoded word length • [00,1001] = 22.05 kHz =Maximum word length - 4 bits • [101] = Encoded word length =Maximum word length - 0 bits HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 90: Manipulating Channel Status Bits (C-Bit)
[000] Aux. bit use is not indicated [001] Aux. bit use is audio data • TX sets bits according to [010] Aux. bit use is co-ordination transmitted word length signal [011] to [111] Undefined HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 91 0 to 7 Reserved • TX sets bits to [00000000] • RX ignores bits 6 to 9 0 to 7 Alphanumeric channel origin data • TX passed bits unmodified HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 92 • RX ignores bits Bytes 17 to 21 reliability flag • TX passed bits unmodified • RX ignores bits 0 to 7 • TX calculates CRC on output HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 93: Manipulating Validity And User Bits (V-Bit And U-Bit)
Remarks • RX optionally mutes data if Validity (V) bit enabled • TX passes bit unmodified • RX ignores bits User (U) bit • TX passed bits unmodified HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 94: Identifying Audio Characteristics (Audio Sampling Frequency And Word Length)
• RX: 32 to 108 kHz Audio sampling frequency • TX: 48 kHz • RX: 16 to 24 bits Audio word length • TX: 16 to 24 bits HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 95: Appendix B: Laser Safety Guidelines
Laser Safety Guidelines Overview This section describes important safety considerations when using laser modules. The following topics are included: • “Laser Safety” on page 80 • “Labels” on page 82 HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 96: Laser Safety
2. Ensure technicians have satisfactorily completed an approved training course before performing installation or maintenance. 3. Ensure there are appropriate warning labels near the optical ports of the modules. HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 97: Precautions For Unenclosed Systems
For guidance on the safe use of optical fiber communication systems in the workplace, consult ANSI Z136.2, American National Standard for Safe Use of Lasers in the U.S., or outside the U.S., IEC-60825, Part 2. HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 98: Labels
Appendix A: Laser Safety Guidelines Labels The label shown in Figure A-1 is applicable to Class 1 laser products. CLASS 1 LASER PRODUCT Figure A-1. Label for Class 1 Laser Products HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 99: Troubleshooting Tips
Communication and Control Troubleshooting Tips Overview Find the following troubleshooting information in this appendix: • “Software Communication Problems” on page 84 • “Hardware Communication Problems” on page 87 HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 100: Software Communication Problems
85), and then verify that the connector does not have any slightly bent or pressed pins. d. Carefully reposition any bent pins. If this is not possible, contact Customer Support. HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 101 ID switch settings. Check that the correct COM port is configured in + Pilot Lite and that • another application is not using that COM port. HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 102 3. Gently push the module into its slot in the frame to ensure it is seated properly and powered up. 4. Verify that the Control window indicates the device is ready. HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 103: Hardware Communication Problems
A-1), and verify the connector does not have any slightly bent or pressed pins. d. Carefully reposition any bent pins. If this is not possible, contact Customer Support. HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 105: Index
Embed mode parameters Back connector 6, 14, 19, Embedder installing ancillary data Balanced audio errors inputs mode Bank selection Equalization Black clip Error counter 40, Breakout cables 6–9, HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 106 Path, audio License keys PCM audio adding Phase, horizontal and vertical purchasing + Pilot Lite 84–86 Local control Pilot jumper for setting Pinouts breakout cable 8–9 RS-422/RS-232 HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...
Page 107 Signal flow Software controlling module WEEE compliance Software version Wet cleaning Source select parameter White clip Specifications Word length 40, 56, fiber optic video output laser output HMX6803+ and OP+HMX+ Installation and Operation Manual Copyright © 2009, Harris Corporation...

This manual is also suitable for:

Op+hmx+

Harris HMX6803+ Installation And Operation Manual

Preface

Chapter 1: Introduction

Chapter 2: Installation

Chapter 3 : Operation

Chapter 4 : Specifications

Appendix A: Audio Bit Manipulation

Appendix B: Laser Safety Guidelines

Appendix C: Communication and Control

Troubleshooting Tips

Index

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Harris HMX6803+

Summary of Contents for Harris HMX6803+

This manual is also suitable for:

Table of Contents