Select UL Listed/CSA Approved
twist-on wire connectors rated
to connect your power supply cord to 16-gauge dishwasher
Electrical Shock Hazard
Electrically ground dishwasher,
Connect ground wire to green ground connector in
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Remove the green grounding screw and place through the ring
terminal of the green ground wire. Reattach and tighten the
NOTE: Do not pre-twist stranded wire. Twist on wire connector.
Gently tug on wires to be sure both are secured.
Connect wires black to black and white to white, using UL
twist-on wire connectors.
Tighten strain relief screws to secure cord.
Placewires insideterminal box. Insert tabs on left sideof cover.
Make sure wires are tucked insidebox. Close cover ensuring
wires are not pinched. Use 1/4"nut driver or Torx®T20®
screwdriver and previously removed screw to secure cover.
NOTE: Do not plug into outlet until instructedto do so.