My Computer Can't Find the PCI Expansion System
If the expansion system is not visible in your Windows Device Manager
or your Apple System Profiler at all, you will need to turn off your
computer (first) and then the Magma expansion chassis (second) and
test all cords and cables to ensure you have everything connected
correctly. If everything seems to be connected correctly, and you are
sure you have applied power correctly (power up expansion chassis first
and then the computer), then try these additional troubleshooting steps:
Double-check that the PCIe host card is seated correctly in the
right PCIe slot.
Verify the default DIP switch settings on the Host Card:
The DIP switch must be set to the x4 position as shown in
the above photo for the chassis to work correctly, since the
PE6R6-I system supports only PCIe bandwidths up to x4.
Try moving the PCIe host card to a different PCIe slot.
If the expansion system is still not visible after trying all of the
above steps, go to
help.
Windows
If the PCI to PCI Bridge is now visible, but contains a
in front of it, it has a problem that must be fixed.
Chapter 7
to see about getting additional
Chapter 6
Troubleshooting
M A G M A
(exclamation)
23