NCR 2900/260 LF User Manual page 59

Continued
Toggle Session
Enter Desk Accessory
Mode
Enter Setup Mode
Exit Setup Mode
Enter Clock
Enter Calendar
Enter Calculator
Enter ASCII Chart
Enter Diagnostic
Exit Any Desk Accessory
Next Page
Previous Page
Display Page 0
Display Page 1
Display Page 2
Display Page 3
Notes:
1. This function is operational only if EIA (Aux) Rcv-Prtcl = Xon-Xoff/XPC or DTR
2.
In ANSI emulations, this keystroke toggles in and out of Auto Print Mode.
3. This function is operational even if Screen - Saver is set to off.
4.
The ACTION/Keystrokes shown for these Local Functions are programmed as defaults and can be changed
through the "ALT key" parameter in setup mode.
5. This function unlocks the keyboard, turns off all print modes and re-initializes the serial ports for setup
parameters.
6. The length of the Break - Signal is dependent on the setup parameter of "EIA (Aux) Break".
7. This keystroke is dependent on the "Disconnect" setting in the "Keys" (F5) setup menu.
8.
The Increment Scroll Rate toggles the scroll rate to the fastest smooth scroll. This function also stops at the
jump scroll. The Decrement Scroll Rate toggles from jump scroll to the fastest smooth scroll toward the
slowest smooth scroll.
9.
These functions are not available in ANSI emulations.
10. The Change Status Line function will toggle in the status line display from "Indicator" to "Host Write" to
"Both" to "Off" in ANSI Emulations and "Standard" to "Extended" to "Off" on ASCII Emulations.
11. Keystrokes for these functions are only operational if the "Desk Acc= Ctrl-←" in the setup menu.
12.
When a Split Screen is not enabled, these keys select the next or previous pages. Wrapping takes place from
the last page to the first and vice versa.
13. These local functions are operational only if the selected page is available.
In Scan Code Mode (PC-Term emul.), this chart applies only when Local Leadin is on.
Scan Code
Action
Mode
Yes
Yes
Yes
Yes
11 Yes
11 Yes
11 Yes
11 Yes
11 Yes
Yes
12
No
12 No
13 No
13 No
13 No
13 No
Keyboard
Ctrl-Enter (kpd)
Ctrl-←
Ctrl-Scroll Lock
Pause
Ctrl-←,F1
Ctrl-←,F2
Ctrl-←,F3
Ctrl-←,F4
Ctrl-←,F5
Esc
Ctrl-Page Down
Ctrl-Page Up
Ctrl-0\Ins
Ctrl-1\End
Ctrl-2\↓
Ctrl-3\Page Down
50