Placing Originals; Acceptable Originals - Toshiba e-STUDIO355 Copying Manual

2 HOW TO MAKE COPIES

Placing Originals

Acceptable originals

When the RADF (Reversing Automatic Document Feeder, optional) is used, 2-sided originals can be automatically
scanned one sheet after another. When the original glass is used, originals such as OHP films, tracing paper, booklet or 3-
dimensional objects, that cannot be placed on the RADF can be scanned, as well as plain paper.
Location
Original glass
RADF (optional)
Automatic size detection does not work properly when A/B format originals are used in equipment for North
America. It does not work properly when LT format originals are used in equipment other than that for North
America.
Automatic size detection does not work properly when K format paper is used for printing. (K format is a standard
paper size in China.)
Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with force.
Be sure to place ST-size or A5-size originals in a landscape direction when using the RADF (optional).
Maximum number of sheets for one scanning
A maximum of 1000 sheets (A4-size and LT-size originals) can be scanned per 1 copy job or up until the embedded
memory becomes full. When the number of scanned sheets has exceeded the above limit, this equipment stops scanning
and the message below appears.
If you want to print out the data scanned up until then, press [YES]. If you want to delete them, press [NO].
22

Placing Originals

Maximum size
Length: 297 mm (11.69")
Width: 432 mm (17.01")
1-sided originals: 35 - 157 g/m
(9.3 - 41.8 lb.)
2-sided originals: 50 - 157 g/m
(13.3 - 41.8 lb.)
Acceptable sizes for automatic
Paper weight
Other than North America: A3, A4,
A4-R, A5-R, B4, B5, B5-R
—
North America: LD, LG, LT, LT-R,
ST-R
Other than North America: A3, A4,
2
A4-R, A5-R, B4, B5, B5-R, FOLIO
North America: LD, LG, LT, LT-R,
2
ST-R, COMP
size detection