Toshiba e-STUDIO355 Copying Manual page 97

4.EDITING FUNCTIONS
4
Adjust the width of the part to be erased.
1) Press either [
2) Press [OK].
5
Place the original on the original glass.
Place the original with its bottom toward you, matching its center to the
yellow indicator under the original glass.
Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with
force.
Breaking the glass could injure you.
6
Select other copy modes as required, and then press the [START] button on the control
panel.
2 mm] (0.08") or [ 50 mm] (1.97").
4 EDITING FUNCTIONS
Book Center Erase 95