Toshiba e-STUDIO355 Copying Manual page 21

1.BEFORE USING EQUIPMENT
Adding paper in the Large Capacity Feeder during copying
When the paper on the left tray of the Large Capacity Feeder has run out during copying, "Paper for left drawer can be
added." appears. You can pull out the Large Capacity Feeder and add paper to the left tray without stopping copying. This
is useful when you wish to make a large amount of copies quickly.
1
Pull out the drawer of the Large Capacity Feeder
carefully until it comes to a stop.
Only the left tray will come out.
Do not touch the slide rail ("A" in the figure on the right).
This could injure you.
2
Place paper on the left tray.
Place paper aligning to the left-hand side of the tray.
3
Push the drawer of the Large Capacity Feeder straight into this equipment carefully.
When the paper on the right tray has run out, that on the left tray will be automatically shifted to the right tray.
Do not slam the drawer shut. Stacked sheets may collapse and they cannot be transported correctly.
Be careful not to let your fingers be caught when pushing the drawer into this equipment.
This could injure you.
1 BEFORE USING EQUIPMENT
A
Placing Paper 19