Interrupting Copying And Making Other Copies - Toshiba e-STUDIO355 Copying Manual

2 HOW TO MAKE COPIES

Interrupting copying and making other copies

You can interrupt the copy job in progress to make other copies (interrupt copying). When restarting the interrupted job,
you do not have to reselect copy modes that have been set because they are memorized in this equipment.
The following functions cannot be used together with interrupt copying:
Cover sheet copying, Sheet insertion copying, Job build, Store to e-Filing, Copy & File
During interrupt copying, the mode cannot be changed by pressing the [e-FILING], [SCAN], [PRINT] or [FAX]
button on the control panel.
1
Press the [INTERRUPT] button on the control panel.
"Job interrupted job 1 saved" appears and then the [INTERRUPT]
button lights.
If the original is being scanned, the message above appears after
the scanning has finished.
2
Replace the original with a new one.
3
Select other copy modes as required and then press the [START] button on the control
panel.
4
Press the [INTERRUPT] button again after the interrupt copying has finished.
"READY to resume job 1" appears and the interrupted job restarts.
Even if you do not press the [INTERRUPT] button, an interrupted copy job will restart when the current status is
cleared by means of the automatic function clear after a specified period of time.
32 Making Copies