Toshiba e-STUDIO355 Copying Manual page 41

2.HOW TO MAKE COPIES
If you select a wrong paper type, this could cause a paper jam or significant image trouble.
When you select a paper type, you can confirm it with the icons displayed on the equipment status
indication area as shown below.
Paper type
PLAIN
THIN
THICK 1
THICK 2
Automatic 2-sided copying can be applied to plain paper and THICK 1.
For OHP films (TRANSPARENCY), only 1-sided copying can be performed.
For envelopes, only 1-sided copying can be performed on its front side.
7
Select other copy modes as required, and then press the [START] button on the control
panel.
When you copy on sheets of OHP film, remove the copied OHP film one sheet at a time as they exit onto the
receiving tray. If the sheets of OHP film pile up, they may get curled and may not be projected properly.
Icon Paper type
— THICK 3
TRANSPARENCY
ENVELOPE
2 HOW TO MAKE COPIES
Icon
Bypass Copying 39