Part Identification Chart - Weider Pro Power Cage 500 Bench Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included. If a part is missing, please call 1-877-992-5999.
M10 Washer
(37)––20
M10 x 70mm Screw (47)––4
Screw (41)––12
M10 Curved
Washer (46)––4
M10 x 75mm Hex Screw (39)––12
M10 x 80mm Screw (42)––8
M10 x 130mm Screw (40)––4
M6 x 20mm
M10 x 50mm Screw (45)––10
M10 x 75mm Screw (43)––8
5