Installing The Microphone Unit - Kenwood DDX6031BT Instruction Manual

Installation on Toyota,
Nissan or Mitsubishi Car
using Brackets
A
ccessory 6 (M5x6mm)
o
r Accessory 7 (M5x7mm)
74
DDX6031BT/DDX6031BTM/DDX6031/DDX6031M/DDX4031BT/DDX4031BTM/DDX4031/DDX4031M
C
ar Bracket
A
ccessory 6 (M5x6mm)
o
r Accessory 7 (M5x7mm)

Installing the Microphone Unit

(DDX6031BT/DDX6031BTM/
DDX4031BT/DDX4031BTM only)
1
Check the installation position of the
microphone (accessory 8).
2
Remove oil and other dirt from the
installation surface.
3
Install the microphone.
4
Wire the microphone cable up to the unit
with it secured at several positions using
tape or the like.
⁄
•
Install the microphone as far as possible from the
cell-phone.
Accessory 8
F
ix a cable with a commercial item of tape.
P
eel the release coated paper of double-face
adhesive tape to fix on the place shown above.
A
djust the direction of the microphone to the driver.