Kenwood DDX6031BT Instruction Manual page 66

Symptom
No sound comes out of the
speakers.
The iPod/iPhone does not turn
on or does not work.
Sound is distorted.
A lot of noise is generated.
No operations are available
when playing back a track
containing Artwork.
Sound does not synchronize
with the video.
• Videos cannot be played.
• No sound of videos comes
out.
"Reading... " keeps flashing on the
screen.
While playing a track, sound is
sometimes interrupted.
66
DDX6031BT/DDX6031BTM/DDX6031/DDX6031M/DDX4031BT/DDX4031BTM/DDX4031/DDX4031M
Remedy/Cause
• Disconnect the iPod, then connect it again.
• Select another source and then reselect "iPod".
• Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
• Check whether the iPod control mode is
correctly selected. (☞ page 25)
• Reset the iPod/iPhone.
Deactivate the equalizer either on this unit or the
iPod/iPhone.
Turn off (uncheck) the "VoiceOver" feature of the
iPod. For details, visit <http://www.apple.com>.
Operate the unit after the Artwork is loaded. (☞
page 23)
Select <iPod> for <AV Input>. (☞ page 43)
• Connect USB Audio and Video cable KCA-iP202/
KCA-iP22F. Other cables cannot be used.
• Select <iPod> for <AV Input>. (☞ page 43)
Turn off the power and on again.
The tracks are not properly copied into the USB
device. Copy tracks again, and try again.