Adjusting The Cross Over Frequency - Kenwood DDX6031BT Instruction Manual

Adjusting the sound precisely
1
Perform steps
"Selecting a preset sound
mode," then...
2
3
Adjust the sound of each
band.
Flat Changes level of Bass/
Middle/Treble to 0.
Frequency Selects frequency.
Level Adjusts level.
Q Factor Adjusts the width of the
frequency.
Bass EXT Activates/deactivates
bass.
SW Level Adjusts subwoofer level.*
The adjustments are stored and <User>
is activated.
*
Adjustable only when the subwoofer is activated.
☞
( page 41)
34
DDX6031BT/DDX6031BTM/DDX6031/DDX6031M/DDX4031BT/DDX4031BTM/DDX4031/DDX4031M
1 2
and of
Adjusting the cross over
frequency
1
On <Top Menu>:
2
3
Select the item to adjust, then
make adjustment.
Adjusts the cross over for front or rear
speakers (high pass filter).
Adjusts the cross over for subwoofer
(low pass filter).*
Adjusts the cross over frequency.
Selects the phase for the subwoofer. *
Adjusts the subwoofer level.
*
1
Adjustable only when the subwoofer is
☞
activated. ( page 41)
*
2 Not selectable when <Freq> is set to
<Through>.
1
2