Kenwood DDX6031BT Instruction Manual page 27

Displaying the information of the
current station
• This feature is available only for Region 2/3
models.
The station frequency
currently tuned in/PS
(station name) for FM Radio
Data System when PS signal
is coming in
(only for Region 2/3 models)
To tune in FM stations only with strong
signals — Local Seek
• This feature is available only for Region 2/3
models.
1
2
ON Select this to tune in only to
stations with sufficient signal
strength. The LO.S indicator
lights up.
OFF Deactivate the function.
• This feature is available only for Region 2/3
You can store the antenna automatically
when the source is changed from the tuner
to another.
• The antenna is extended regardless of the
1
2
Displays the text
information
Preset list
• This feature is available only for Region 4/6
Press the Reset button while holding the
following buttons.
• Release them after the message appears.
DDX6031BT/DDX6031
DDX4031BT/DDX4031
• Each time you perform the procedure, the
Setting the antenna control
models.
setting when the source is the tuner.
ON Select this to keep the antenna
extended even when the source
is not the tuner.
OFF Select this to store the antenna
automatically.
Changing the tuner channel
interval
models.
tuner channel interval switches between
50 kHz/9 kHz and 200 kHz/10 kHz.
27
English