Installation/Connection
Installing the unit (in-dash mounting)
Install onto the car brackets using the supplied screws (C) or (D). The
screw holes differ depending on the model of the cars.
Do the required wiring.
(Page 30)
Dashboard of your car
* Only for illustration purpose.
Use only the specified screws. Using wrong screws
might damage the unit.
Car bracket*
Installing in Toyota cars
Install onto the car brackets using the supplied screws (C) or (D). Use
the mounting holes (
) or (
) that fit the car brackets. Then, install the
supplied trim plate (A).
Do the required wiring.
(Page 30)
Dashboard of your car
* Only for illustration purpose.
Car bracket*
29
ENGLISH