Intrusion Detection; Dynamic Dns - Technicolor TD5130 Setup & User Manual

7.5

Intrusion Detection

Your Wireless Gateway protects your network against malicious intrusions. The Intrusion Detection
page shows you the intrusions that you are protected against. The Protected Intrusions table shows the
number of times the Wireless Gateway actively protected your network against each intrusions.
To view the Intrusion Detection page, on the main menu, click Toolbox > Intrusion Detection.
7.6

Dynamic DNS

The Dynamic DNS (DDNS) service allows you to assign a fixed DNS host name to an Internet connection
even if it is using a dynamic IP address. As soon as your Wireless Gateway internal connection gets a
new IP address, the dynamic DNS service updates the host name entry to the new IP address. The
dynamic DNS service relies on servers that link the public IP address to a subscribed DNS host name.
To view the Dynamic DNS page, on the main menu, click Toolbox > Dynamic DNS.
In order to use a dynamic DNS service, you must first register and enroll for DNS service with a Dynamic
DNS service provider. The DDNS service provider will provide the necessary parameters to complete
your Wireless Gateway Dynamic DNS setup.
To configure the Dynamic DNS service of your Wireless Gateway, click Configure on the upper-right
corner of the screen.
▪ Enabled — Check this box to enable the DDNS.
▪ Interface — The DDNS interface is the Internet.
▪ Username — Enter the username provided by the DDNS service provider.
▪ Password — Enter the password provided by the DDNS service provider.
Copyright © 2012 Technicolor. All rights reserved.
DMS-CTC-20120508-0000 v1.0.
SETUP & USER GUIDE
33