Anynet+(Hdmi-Cec) - Samsung PE40C Manual

7
System

7.14 Anynet+(HDMI-CEC)

m
MENU [
7.14.1 Anynet+(HDMI-CEC)
What is Anynet+?
Anynet+ is a function that enables you to control all connected Samsung devices that support
with your Samsung product remote. The
have the Anynet+
logo on it.
You can only control Anynet+ devices using the product remote control, not the buttons on the

product.
The product remote control may not work under certain conditions. If this occurs, reselect the

Anynet+ device.
The Anynet+ functions do not operate with other manufacturers' products.

For instructions explaining how to connect Anynet+ external devices, refer to the device's user

manual You must connect an Anynet+ device using an HDMI cable. Some HDMI cables may not
support Anynet+ functions.
Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.

While in PIP mode, Anynet+ functions only when an AV device is connected as the primary display.

It does not work if the AV device is connected as a secondary display.
Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the

same type.
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the
product.
Anynet+ Menu
View PC
Device List
(device_name)
] System Anynet+(HDMI-CEC)
Anynet+
feature. To be sure your Samsung device has this feature, check if there is an
Changes Anynet+ mode to PC mode.
Shows the Anynet+ device list.
MENU Shows the menu of the connected device menus. E.g. if a DVD player is
connected, the disc menu of the DVD player will appear.
ENTER [ ]
system can be used only with Samsung devices that
Description
Anynet+
Anynet+
162
7 System