Check The Followings - Samsung PE40C Manual

13
Troubleshooting Guide

13.1.3 Check the followings.

The screen keeps switching on and off.
Blank spaces are found at the top and bottom
of the screen when an HDMI or HDMI-DVI
cable is connected to the product and PC.
PC is shown in
connected.
The power LED is off. The screen will not
switch on.
"No Signal" is displayed on the screen (refer
to "Connecting to a PC").
"Not Optimum
The images on the screen look distorted.
Installation issue (PC mode)
Source when a PC is not
Screen issue
Mode" is displayed.
Check the cable connection between the
product and PC, and ensure the connection is
secure.
Blank spaces on the screen are not caused by
the product.
The cause of the problem is the PC or graphics
card, and can be fixed by adjusting the screen
size in the HDMI or DVI option of the graphics
card settings menu.
If the graphics card settings menu has no
option to adjust the screen size, update the
graphics card driver to the latest version.
(Please contact the graphics card or computer
manufacturer for details on how to adjust the
screen settings.)
PC is always shown in Source
whether or not a PC is connected.
Make sure that the power cord is connected.
("2.2 Connecting and Using a PC")
Check that the product is connected correctly
with a cable.
("2.2 Connecting and Using a PC")
Check that the device connected to the
product is powered on.
This message is displayed when a signal from
the graphics card exceeds the product's
maximum resolution and frequency.
Refer to the Standard Signal Mode Table and
set the maximum resolution and frequency
according to the product specifications.
Check the cable connection to the product.
("2.2 Connecting and Using a PC")
13 Troubleshooting Guide
irrespective of
268