Source Autoswitch Settings - Samsung PE40C Manual

7
System

7.12 Source AutoSwitch Settings

m
MENU [
Turning on the display with
active, the display will automatically search the different video input sources for active video.
Source AutoSwitch

When the Source AutoSwitch
active video.
The Primary Source
Secondary Source
If both the primary and secondary input sources are not recognized, the display will perform two
searches for an active source, each search checking the primary and then secondary source. If both
searches fail, the display will return to the first video source and display a message indicating that
there is no signal.
When the Primary Source
twice in sequence looking for an active video source, returning back to the first video source in the
sequence if no video is found.
Primary Source Recovery

Select whether to restore the selected primary input source when a primary input source is
connected.
The
Primary Source

Specify Primary Source
Secondary Source

Specify Secondary Source
] System Source AutoSwitch Settings
Source AutoSwitch
is On, the display video source will automatically be searched for
selection will be activated, if the current video source is not recognized.
selection will become active, if no primary video source is available.
selection is set to All, the display will search all the video source inputs
Source AutoSwitch Settings
Source AutoSwitch
· Primary Source Recovery
· Primary Source
· Secondary Source
The displayed image may differ depending on the model.
Primary Source Recovery
for the automatic input source.
for the automatic input source.
ENTER
On, and the previous video source selection is not
function is disabled if Primary Source
[ ]
On
Off
All
PC
is set to All.
7 System
158