Screen Size; Pc Screen Adjustment; Resolution Select - Samsung PE40C Manual

4
Screen Adjustment
1
Press the
2
Select the Zoom
3
Press the [
4
Press the
5
Press the [
6
Select Close
If you want to reset the picture to its original position, select
The picture will be set to its default position.

4.3.3 4:3 Screen Size

Available only when picture size is set to Auto Wide.
You can determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size.
Each European country requires different picture size.
Not available in PC,

4.3.4 PC Screen Adjustment

Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, use
the Coarse function to adjust the frequency as best as possible (Coarse) and Fine-tune again. After the
noise has been reduced, re-adjust the picture so that it is aligned with the centre of screen.
Position: To adjust the PC's screen position if it is not centred or does not fit the product screen. Press
the or button to adjust the Vertical Position. Press the
Position.
Image Reset: Resets the image to the default settings.
This option is available when the input source is PC.

4.3.5 Resolution Select

If the picture is not normal even when the resolution of the graphics card is one of the following, you can
optimize the picture quality by selecting the same resolution for the product as the PC using this menu.
Available resolutions:
This option is available when the input source is PC.
button to select Zoom/Position.
or Position.
] button.
/ / / button to move the picture.
] button.
by pressing the and
Component or HDMI
Off / 1024 x 768 / 1280 x 768
buttons sequentially.
Reset
mode.
or button to adjust the Horizontal
/ 1360 x 768 / 1366 x 768
in the Zoom/Position screen.
121
4 Screen Adjustment