Prevention Of Afterimage Burn-In - Samsung PE40C Manual

Appendix

Prevention of Afterimage Burn-in

What is afterimage burn-in?
Afterimage burn-in should not occur when the LCD panel is operating normally. Normal operation refers
to a continuously changing video pattern. If the LCD panel displays a fixed pattern for an extended period
of time (more than 12 hours), a slight voltage difference may occur between the electrodes in pixels that
control the liquid crystals.
Such a voltage difference between electrodes increases with time and makes the liquid crystals thinner.
When this occurs, a previous image can remain on the screen when the pattern changes. To prevent this,
the accumulated voltage difference should be reduced.
Powering Off, Screen Saver and Power Saving Mode

Power off the product for 2 hours after using it for 12 hours.

Power off the product for 4 hours after using it for 20 hours.

Go to Display Properties > Power Supply on your PC and set the product to power off as

required.
Using a screen saver is recommended.

It is best to use a single-colour or moving-image screen saver.
Black Matrix
Common
Electrode (ITO)
Source Drain
Gate
Pixel Electrode (ITO)
Data Bus-Line
Color-Filter
Storage
Capaccitor (Cs)
Appendix
292