Wps(Pbc) - Samsung PE40C Manual

6
Network
12
Enter the next portion of the
13
Repeat the entry process for each field in the
If you make a mistake when entering a number, re-enter the number to correct it. You can also
press the
14
When done entering the
15
Press the
16
Repeat the same entry process for
17
When done, select
screen appears and the verification process starts. When the connection has been verified, the
"Your wireless network and Internet connection are setup and ready to
appears.

6.1.5 WPS(PBC)

How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow these steps.
1
Go to Network Setting
2
Select Start, press [
3
Press the WPS(PBC) button on your router within 2 minutes. Your product automatically acquires all
the network setting values it needs and connects to your network.
4
The network connection screen appears, and network setup is done.
IP Address. Press the
or button to change the number one unit at a time.
IP Address, press [
button to go to the Subnet Mask
Subnet
OK at the bottom of the page, and then press [
screen.
], and then press [
button to go to the next field.
IP Address.
].
fields, and then press [
Mask, Gateway, and DNS
] again.
].
Server.
]. The network connection
use." message
141
6 Network