Download  Print this page

Setting Up Anynet+ (hdmi-cec); Using Anynet+ (hdmi-cec) - Samsung UN40J5300AG E-manual

Hide thumbs

Advertisement

Using Anynet+ (HDMI-CEC)

"
This function is only available on certain models in specific geographical areas.
Use Anynet+ (HDMI-CEC) to control all external devices that support HDMI-CEC using just the TV's
remote control. Note that Anynet+ (HDMI-CEC) only works with the TV's remote control and not with
the panel keys.
"
Anynet+ cannot be used to control external devices that do not support HDMI-CEC.
"
Anynet+ devices must be connected to the TV using an HDMI cable. Some HDMI cables may not support
Anynet+ (HDMI-CEC). In this case, you will need to replace the HDMI cable.
"
The TV remote control may not function under certain circumstances. If this occurs, select the Anynet+
device again.
"
Anynet+ (HDMI-CEC) only works with external devices that support HDMI-CEC and only when those
devices are either in standby mode or turned on.
"
Anynet+ (HDMI-CEC) can control up to 12 compatible external devices (up to 3 of the same type). With
home theater systems, however, the number of systems that can be controlled is limited to one.
"
To listen to 5.1-channel audio from an external device, connect the device to the TV via an HDMI cable and
the device's digital audio output connector directly to the home theater system.
"
A home theater system that has been connected to the TV using an HDMI cable and an optical cable
supports 2-channel audio only. 5.1-channel audio is, however, available for digital broadcasts with
5.1-channel audio.

Setting Up Anynet+ (HDMI-CEC)

MENU
>
System
>
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)
Enables/disables Anynet+ (HDMI-CEC). Set to
On to enable all Anynet+ related features.
Auto Turn Off
Try Now
When set to Yes, turns off Anynet + compatible external devices when the TV is turned off.
"
Some Anynet + compatible devices do not support this feature.
Device search
Search for
Anynet+ (HDMI-CEC)
Try Now
Try Now
compatible devices.
Try Now
Off
to disable all Anynet+ related features. Set to

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: