Connection Using An Ir Stereo Cable - Samsung PE40C Manual

1
Preparations

1.2.5 Connection Using an IR Stereo Cable

Turn off the device before connecting the External Sensor Kit. After it is connected, turn on the device.
Controlling more than one display product using your remote control
Connect the [IR OUT] port on the product to the [IR / AMBIENT SENSOR IN] port on the other

display product using the dedicated stereo cable.
A command sent from the remote control pointed at product

products
The appearance may differ depending on the product.
Controlling more than one display product using an external sensor kit (sold separately)
POWER
SOURCE
A command sent from the remote control pointed at product

connected) will be received by both display products
The appearance may differ depending on the product.
IR OUT
and .
IR/
AMBIENT
SENSOR IN
IR/
AMBIENT
SENSOR IN
will be received by both display
IR OUT
(to which the external sensor kit is
and .
IR/
AMBIENT
SENSOR IN
35
1 Preparations