Advertisement
Using your iPod Adapter
Using your iPod Adapter
Connecting Your iPod
Selecting a Search Category
1. Connect your iPod to the adapter so that the
logo on the cable is facing outward.
2. Upon connecting your iPod, you will see the
Brandmotion logo on the iPod screen. The logo tells
you the iPod is connected and charging. You may
disconnect your iPod at any time.
3. Turn on your radio and press the
select SAT1.
4. If your iPod was playing a track, the same track
will resume playing through your car stereo. If not,
your iPod will begin playing the first song on your
first album. (When connecting your iPod for the
first time, it may take the vehicle several seconds to
synchronize the iPod)
There are three search modes to choose from:
Album, Artist, and Playlist. The iPod adapter default
category is Album.
1. To change the search category, press
radio head unit until CATEGORY
appears on the radio display.
2. Using the
UP
between Album, Artist, and Playlist categories.
3. Stop on your desired option and after three
seconds that category will be selected and the first
song in that mode will begin to play.
and OWN arrows, navigate
button to
on the
3
Advertisement
