Resetting To The Factory Default Settings - Axis 210 User Manual

Resetting to the Factory Default Settings

To reset the camera to the original factory default settings, go to the System Options >
Maintenance web page (as described in Maintenance, on page 39) or use the Control
button on the underside of the camera (see the illustration on page 7) as described below:
Using the Control Button
To reset the camera to the factory default settings using the Control Button:
1. Disconnect the power adapter, or the network cable if using PoE (AXIS 211/211A
only).
2. Press and hold the Control button while reconnecting the power.
3. Keep the Control button pressed until the Status Indicator color changes to amber
(this may take up to 15 seconds).
4. Release the Control button.
5. When the Status Indicator changes to Green (which may take up to 1 minute), the
process is complete and the camera has been reset. The unit will now have the
default IP address 192.168.0.90
Advanced
Scripting is an advanced function that provides the means for customizing and using
scripts.
Caution!
The scripting function is a very powerful tool. Improper use may cause unexpected
behavior or even loss of contact with the unit. If a script does cause problems, reset the
unit to its factory default settings (in which case, a previously saved backup file will be
useful for returning the unit to its latest configuration). Axis strongly recommends that
you do not use this function unless you fully understand the consequences. Axis
support provide no assistance for customized scripts.
For more information, please visit the Developer pages at www.axis.com/developer
Plain Config - this function is for the advanced user with previous experience of
configuring Axis cameras. All parameters can be set and modified from this page,
including the audio encoding format. Help is available via the links on the standard setup
pages.
AXIS 210/211/211A - System Options
41