Auto Adjust - Advantech FPM-3159 Series User Manual

C.1 Introduction:
The following pictures will appear on the screen when pressing the
SEL key. Adjust each value by pushing the UP and DOWN keys.
C.2 Menu:
Each selected value is stored into LCD memory after SEL signal input
or time out. The stored values are not affected if the power is turned
off. But the selected value is not available in case a selected mode is
changed before time out or power is turned off before time out.
The brightness value can not be stored while the variable volume
resistor is selected.
This function dose not work while in save mode.
C.3 Auto Adjust
You can press Yes of Auto Adjust to adjust the Clock and Position
settings.
26 FPM-3159 Series User's Manual