After performing the installation or maintenance procedure, slide the server back into the rack, and
3.
then press the server firmly into the rack to secure it in place.
WARNING:
release latches and sliding the server into the rack. The sliding rails could pinch your fingers.
Remove the access panel
WARNING:
internal system components to cool before touching them.
CAUTION:
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.
To remove the component:
To reduce the risk of personal injury, be careful when pressing the server rail-
To reduce the risk of personal injury from hot surfaces, allow the drives and the
For proper cooling do not operate the server without the access panel, baffles,
Operations 21