HP ProLiant DL385 G6 User Manual page 33

18 iLO 2 connector
19 NIC 3 connector
20 NIC 4 connector
WARNING: To reduce the risk of electric shock, fire, or damage to the equipment, do not plug
telephone or telecommunications connectors into RJ-45 connectors.
Connect the power cord to the rear of the server.
3.
Install power cord anchors.
4.
Secure cables to the cable management arm.
5.
IMPORTANT:
in each of the cables to prevent damage to the cables when the server is extended from the
rack.
Connect the power cord to the AC power source.
6.
When using cable management arm components, be sure to leave enough slack
—
—
—
Setup 33