Change Presser Foot; Movable Upper Cutter; Disengage The Movable Upper Cutter; Engage The Movable Upper Cutter - Husqvarna Viking Viking Huskylock s25 User Manual

CHANGE PRESSER FOOT

Turn off the main power switch and unplug the machine.
1. Raise the presser foot.
2. Turn the hand wheel toward you until the needles are at
the highest position.
3. Push the red button on the back of the presser foot
ankle to release the presser foot.
4. Raise the presser foot to the extra lift position and the
foot will come off.
5. Place the new foot with the pin right underneath the
groove of the ankle while in the extra lift position.
Lower the presser foot. Push the red button on the back
of the presser foot ankle and the foot will snap into
place.

MOVABLE UPPER CUTTER

Disengage the Movable Upper Cutter

(Position C)
Turn off the main power switch and unplug the machine.
• Turn the handwheel toward you until the upper cutter is
raised to the highest position.
• Open the front cover.
• Pull the movable cutter knob to the right as far as it will
go (1).
• Turn the knob toward you counter clockwise (2) until the
cutter clicks into the locked position C.

Engage the Movable Upper Cutter

(Position S)
Turn off the main power switch and unplug the machine.
• Open the front cover and pull the movable cutter knob
to the right as far as it will go (1).
• Turn the knob clockwise (2) until the cutter clicks into
the cutting position S.
10
1
2
1
2