Table of Contents
Advertisement
Motion Recording
1. CH1 - CH4: Lists all available cameras for configuration. Press the
←→
and press the
to change the settings, and press SEL to accept the changes:
• FPS: A set number of Frames Per Second (total) is divided between all available cameras
based on Resolution settings.:
• QUALITY: Set the quality level for the recording - High, Mid, Low or Off
2. POST MOTION DURATION: Set the duration that the alarm will continue once detected: 5, 30,
60, 90, 120, 150, 180, 210 or 240 seconds.
3. SETUP MOTION: Configuration for each Motion Sensor enabled Camera Press the
buttons to highlight the Setup Motion option, and press the SEL button to access the SETUP
MOTION submenu. Press the
SEL button to select.
• AREA: Press the SEL button on the AREA option to specify segments of the Camera view
to have Motion Detection. Use the
navigate around the Motion Setup screen, and press
the SEL button to turn a segment ON/OFF. Press the
MENU button once complete. Dark Blue indicates that
a section has been selected for motion detection, and
blank areas indicate that motion will not be detected
in those areas.
• SENSE: Sets the Sensitivity of the Motion Detection:
Use the
and
setting to High, Mid, Low or Off.
4. SAVE & EXIT: Saves any changes made, and exits to the Main Menu. Press the
to highlight, and press the SEL button to accept the changes.
buttons to select the FPS or Quality for each CH. Use the and
and
buttons to highlight a specific Camera, and press the
and SEL buttons to change the
buttons to
Recording Set
and
buttons to highlight,
buttons
and
and
buttons
27
Advertisement
Table of Contents
