Lexmark X644e Menus And Messages Manual page 9

Fax Receive Settings
Menu item Purpose
Enable Fax Receive Allows fax jobs to be received by the
MFP.
Rings to Answer The MFP rings a set number of times
to indicate an incoming fax job.
Auto Reduction Scales an incoming fax job so it fits the
size of the print media loaded in the
designated fax source. See Paper
Source as follows for more
information.
Paper Source Specifies the print media source
selected to supply print media for the
MFP to print an incoming fax.
Duplex Sets duplex printing (two-sided
printing) either on or off for incoming
fax jobs.
This menu item appears if an optional
duplex unit is installed or if the MFP
model has an internal duplex unit.
Fax Footer Prints the transmission information at
the bottom of each page from a
received fax.
Using MFP menus
Values and descriptions
Yes*
No
1–25 (1*)
On*
Off
Auto*
Tray <x>
MP Feeder
Tray <x>
(if an optional
drawer is
installed)
On
Off*
On*
Off
Settings
56
Fax jobs can be received.
Fax jobs cannot be received.
Scales the incoming fax.
Does not scale the incoming fax.
The print media source is
automatically selected by the MFP.
Tray <x> or the standard tray is the
specified print media source, where
<x> is the number of the tray.
The multipurpose feeder is the
specified print media source.
Tray <x>, which can be any optional
drawer, is the specified print media
source, where <x> is the number of
the tray in the drawer.
The incoming fax is a duplex job.
The incoming fax is not a duplex job.
Select On for the footer to print.
Select Off to not print the footer.