Fax Status Messages; Cancel Jobs Messages; Password And Pin Messages - Lexmark X644e Menus And Messages Manual

Fax status messages

Message
Answering
Call complete
Connect <x>bps
Dialing
Fax failed
Job stored for delayed transmission.
Line busy
No answer
No dial tone
Queued for sending
Receive complete
Receiving page [n]
Sending page [n]
Set clock
Waiting for redial

Cancel jobs messages

Message
Deleting selected job(s)
Job cannot be deleted
No jobs selected

Password and PIN messages

Message
Invalid or incorrect password. An incorrect password is entered. Touch Continue to return to the screen to
Invalid PIN.
Understanding MFP messages
Meaning
The MFP is answering a fax call.
A fax call is completed.
The fax is connected. <x> is the baud rate per second.
A fax number is dialed. If the number is too long to fit on the screen
only the word Dialing appears.
The fax failed to send.
The scanning completes for a delayed send fax job.
A fax number is dialed, but the fax line is busy.
A fax number is dialed, but no connection is made.
The MFP does not have a dial tone.
The scanning process of a fax job completed, but it is not sent yet
because another fax job is being sent or received. As this one job
waits for its turn, this message appears for three seconds.
The MFP has received an entire fax job.
The MFP receives page [n] of the fax job, where n is the number of the
page received.
The MFP sends page [n] of the fax job, where n is the number of the
page sent.
The Real Time Clock is not set. This message appears if no other fax
status message appears. It remains until the clock is set.
Set the clock.
The MFP is waiting to redial the fax number.
Meaning
The Delete button is touched after jobs have been selected.
A job in the job list is touched, but it cannot be canceled.
The Delete button is touched when no jobs are selected.
Meaning
An incorrect Personal
Identification Number (PIN) is
entered.
Fax status messages
95
Action
enter a correct password.
Touch Continue to return to the screen to
enter a correct PIN.