Lexmark X644e Menus And Messages Manual page 21

Message
39 Page is too complex
to print
50 PPDS font error
51 Defective flash
detected
52 Not enough free space
in flash memory for
resources
52 Unformatted flash
detected
54 Network [x] software
error
Understanding MFP messages
Meaning
The page may not print correctly
because the print information on the
page is too complex.
The MFP has received a request for a
font that is not installed when
formatting PPDS print data.
The MFP detects a defective flash
memory during power-on or during
flash format and write operations.
There is not enough space in the
flash memory to store the data
currently being downloaded.
The MFP detects unformatted flash
memory.
The MFP cannot establish
communications with a specified
installed network port. x indicates the
number of the specified port.
Attendance messages
103
Action
To avoid this error in the future:
Reduce the complexity of the page by reducing
the amount of text or graphics on the page and
deleting unnecessary downloaded fonts or
macros.
Set Page Protect to On in the Setup Menu in the
Settings menu.
Install additional memory.
Touch Cancel Job to cancel the current job if
needed.
Touch Reset Active Bin to change to another
linked bin.
Touch Continue to clear the message and
continue printing the current job.
Touch Cancel Job to cancel the current job if
needed.
Touch Reset Active Bin to change to another
linked bin.
Touch Continue to clear the message and
continue printing the current job.
At power-on reset, touch Continue to clear the
message and the MFP continues with normal
operations except for flash operations.
Install different flash memory to be able to
download any resources to flash.
Touch Continue to clear the message and
continue the print job.
Install flash memory with more storage capacity.
Download the data.
Touch Cancel Job to cancel the current job if
needed.
Touch Reset Active Bin to change to another
linked bin.
Touch Continue to clear the message and
continue printing. The MFP continues with
normal operations except for flash operations.
Reformat the flash to allow flash operations.
If the error message reappears, the flash
memory may be defective and require replacing.
• Touch Continue to clear the message and
continue printing. The job may not print
correctly.
• The MFP disables attempts to communicate
through the network interface. No data may
be sent or received.
• Reset the MFP.
• Program new firmware for the network
interface.