8.3.2 Adjusting the width of the armrests
• The transverse width adjustment is achieved by releasing
locking lever (G) and positioning the armrest tube to width
required and re-tightening locking lever (G).
• To remove the transverse width adjustment armrest
assembly complete to allow removal of the front battery
box/controller assembly: remove seat, release locking lever
(G), depress spring button lock (F) and withdraw complete
armrest unit sideways.
NOTE:
When re-assembling to chair always ensure the spring button lock (F) is on the inside of the
horizontal mounting tube of the sideframe to prevent accidental dismantling of armrest unit.
CAUTION: The armrests are not intended for carrying the wheelchair!
43