9.3
Adjustment
• To extend the footrest laterally, release the
winged screw A, pull the footrest forward, re-
tighten when the desired position is achieved.
It is not necessary to release the grub screw B.
This should remain permanently in position.
• To adjust the footrest length, loosen the hex
nut C on the extension tube, use a twisting
motion when sliding the telescopic tube in and
out. Be sure to re-tighten the nuts securely
when the desired height is achieved.
Caution!
• The lowest part of the footrest must be at least 60 mm (2") from the ground for clearance!
58